Getting your 1More Evo 2026 earbuds ready to use is simple. Follow these step-by-step instructions to pair and set them up for the best listening experience.

Charging Your Earbuds

Before pairing, ensure your earbuds are fully charged. Place the earbuds in the charging case and connect the case to a power source using the included USB cable. A LED indicator will show charging status.

Powering On the Earbuds

Remove the earbuds from the charging case. They will automatically turn on. You should see a blinking LED light indicating they are powered on and ready to pair.

Entering Pairing Mode

The earbuds automatically enter pairing mode when powered on for the first time. If they are already paired or need to reconnect, press and hold the touch control on both earbuds simultaneously for 5 seconds until the LED flashes rapidly.

Connecting to Your Device

Open the Bluetooth settings on your smartphone or device. Look for "1More Evo 2026" in the list of available devices. Tap on it to connect. Once connected, the LED will turn steady or stop blinking.

Adjusting Settings and Controls

You can customize your listening experience using the touch controls:

  • Tap once on either earbud to play or pause music.
  • Double-tap to skip to the next track.
  • Triple-tap to go back to the previous track.
  • Press and hold to activate voice assistant or to reject calls.

Connecting to Multiple Devices

The 1More Evo 2026 earbuds can remember multiple devices. To switch between devices, disconnect from one in Bluetooth settings and then connect to another. Re-pair if necessary.

Resetting Your Earbuds

If you experience connectivity issues, reset the earbuds by placing them in the charging case, then pressing and holding the touch controls on both earbuds for 10 seconds until the LEDs flash rapidly. Re-pair with your device afterward.

Additional Tips

Keep your earbuds clean and free of debris. Store them in a safe place when not in use. Update the firmware through the official app for optimal performance.